Y.A.T - Yet Another Trinado
A Tornado based trimaran project

 Home    Design    Material    Drawings    Building    Files    Links
 Jig    Outside Hull    Fairing    Turning    Inside hull

Each station has been drawn on chip-board (particle board) then cut out with a jig saw, and mounted on frames that has been screwed to the floor (wooden)


The bow plate has been cut out of 9 mm plywood and mounted.
The longitude frame battens will be temporary attached to this plate.
There will be a transition from sandwich core laminate to single skin laminate when the hull is attached to this plate.




All battens mounted
(actually two more are needed)


 Next: Applying the hull